DLA499774, Lambda beam pigtailed 785-100 SM, 785 nm, 100 mW fiber out, single-mode fiber, FC/PC
-
DLA499152, Lambda beam FIBER 685-20 SM, 685 nm, 20 mW fiber output, single mode
-
DLA499158, Lambda beam FIBER 690-100, SM 690 nm, 100 mW fiber output, single mode
-
DLA499420, Lambda beam FIBER WL 852-100 PM, 852 nm, 100 mW fiber output, sm pol. Maintaining
-
DLA499425, Lambda beam FIBER WL 852-250 PM² ,852 nm, 250 mW fiber output, sm pol. maintaining
-
DLA499428, Lambda beam FIBER WL 976-100 PM, 976 nm, 100 mW fiber output, sm pol. Maintaining
-
DLA499509, Lambda beam pigtailed 658-60 SM, 658 nm, 60 mW fiber out, single-mode fiber, FC/PC
-
DLA499515, Lambda beam pigtailed 785-20 SM, 785 nm, 20 mW fiber out, single-mode fiber, FC/PC
-
DLA499779, Lambda beam pigtailed 808-60 SM, 806 nm, 60 mW fiber out, single-mode fiber, FC/PC
Lambda Beam Pigtailed
Lambda Beam Pigtailed is a compact, fiber-coupled laser module featuring a permanently attached optical fiber for maximum stability, reliability, and ease of integration. Designed to meet the demanding requirements of industrial systems and scientific instrumentation, the module delivers high optical performance in an exceptionally compact form factor.
* Output powers up to 300mW
* FC/PC or FC/APC connectors
* Single-mode/Polarization-maintaining available
* Internal 8°-angle-cleaved fiber to reduce back reflexion
Lambda beam pigtailed
Wavelength: 785nm
Power: 100mW
Back reflexion suppression: Internal 8°-Angle-Cleaved fiber
Connector: FC/PC or FC/APC
Beam mode: TEM00 (single mode)
Beam alignment: < 5 mrad and < 0.1 mm (compared to base mount)
Noise: < 2 % RMS
Power stability: < 1 % (10h)
Temp. accuracy: < 10 mK
Warm-up time: Ready for use after 5s, calibrated operation after 5 min
Drive mode: Active current control
Modulation: Adjustable constant power; analog or digital external modulation up to 1.5 MHz
Control modes: Power, temperature and modulation mode via USB
Recommended products
Goggle suggestions use the ANSI Z136.1 method for continuous-wave lasers (7 mm pupil; 0.25 s for visible, 10 s for near-infrared wavelengths) and list only goggles rated at or above the required optical density at this wavelength. Please confirm the choice with your laser safety officer.
Frequently Bought Products
Product Queries (0)
Ask Britton a technical question Or Log In to post it here
Other Questions
No none asked to seller yet
-
DLA499152, Lambda beam FIBER 685-20 SM, 685 nm, 20 mW fiber output, single mode
-
DLA499158, Lambda beam FIBER 690-100, SM 690 nm, 100 mW fiber output, single mode
-
DLA499420, Lambda beam FIBER WL 852-100 PM, 852 nm, 100 mW fiber output, sm pol. Maintaining
-
DLA499425, Lambda beam FIBER WL 852-250 PM² ,852 nm, 250 mW fiber output, sm pol. maintaining
-
DLA499428, Lambda beam FIBER WL 976-100 PM, 976 nm, 100 mW fiber output, sm pol. Maintaining
-
DLA499509, Lambda beam pigtailed 658-60 SM, 658 nm, 60 mW fiber out, single-mode fiber, FC/PC
-
DLA499515, Lambda beam pigtailed 785-20 SM, 785 nm, 20 mW fiber out, single-mode fiber, FC/PC
-
DLA499779, Lambda beam pigtailed 808-60 SM, 806 nm, 60 mW fiber out, single-mode fiber, FC/PC
