DLA499544, Lambda beam pigtailed 635-2.5 PM, 635 nm, 2.5 mW fiber out, polarization-maintaining fiber, FC/PC
-
DLA499488, Lambda beam FIBER 1064-65 PM, 1064 nm, 65 mW fiber output, sm pol. maintaining
-
DLA499489, Lambda beam FIBER 1064-90 PM, 1064 nm, 90 mW fiber output, sm pol. maintaining
-
DLA499490, Lambda beam FIBER 1064-200 PM, 1064 nm, 200 mW fiber output, sm pol. maintaining
-
DLA499491, Lambda beam FIBER 1085-30 PM, 1085 nm, 30 mW fiber output, sm pol. Maintaining
-
DLA499530, Lambda beam pigtailed 405-30 COL SM, 405 nm, 30 mW fiber out, single-mode fiber, incl. Ø8 mm, Sealed, Argon-Gas-Filled Collimator
-
DLA499566, Lambda beam pigtailed 785-6.5 PM, 785 nm, 6.5 mW fiber out, polarization-maintaining fiber, FC/PC
-
DLA499575, Lambda beam pigtailed 1550-1.5 PM, 1550 nm, 1.5 mW fiber out, polarization-maintaining fiber, FC/PC
-
DLA499577, Lambda beam pigtailed 405-300 MM, 405 nm, 300 mW fiber out, multi-mode fiber, FC/PC
Lambda Beam Pigtailed
Lambda Beam Pigtailed is a compact, fiber-coupled laser module featuring a permanently attached optical fiber for maximum stability, reliability, and ease of integration. Designed to meet the demanding requirements of industrial systems and scientific instrumentation, the module delivers high optical performance in an exceptionally compact form factor.
* Output powers up to 300mW
* FC/PC or FC/APC connectors
* Single-mode/Polarization-maintaining available
* Internal 8°-angle-cleaved fiber to reduce back reflexion
Wavelength: 635nm
Power: 2.5mW
Back reflexion suppression: Internal 8°-Angle-Cleaved fiber
Connector: FC/PC or FC/APC
Beam mode: TEM00 (single mode)
Beam alignment: < 5 mrad and < 0.1 mm (compared to base mount)
Noise: < 2 % RMS
Power stability: < 1 % (10h)
Temp. accuracy: < 10 mK
Warm-up time: Ready for use after 5s, calibrated operation after 5 min
Drive mode: Active current control
Modulation: Adjustable constant power; analog or digital external modulation up to 1.5 MHz
Control modes: Power, temperature and modulation mode via USB
Recommended products
Goggle suggestions use the ANSI Z136.1 method for continuous-wave lasers (7 mm pupil; 0.25 s for visible, 10 s for near-infrared wavelengths) and list only goggles rated at or above the required optical density at this wavelength. Please confirm the choice with your laser safety officer.
Frequently Bought Products
Product Queries (0)
Ask Britton a technical question Or Log In to post it here
Other Questions
No none asked to seller yet
-
DLA499488, Lambda beam FIBER 1064-65 PM, 1064 nm, 65 mW fiber output, sm pol. maintaining
-
DLA499489, Lambda beam FIBER 1064-90 PM, 1064 nm, 90 mW fiber output, sm pol. maintaining
-
DLA499490, Lambda beam FIBER 1064-200 PM, 1064 nm, 200 mW fiber output, sm pol. maintaining
-
DLA499491, Lambda beam FIBER 1085-30 PM, 1085 nm, 30 mW fiber output, sm pol. Maintaining
-
DLA499530, Lambda beam pigtailed 405-30 COL SM, 405 nm, 30 mW fiber out, single-mode fiber, incl. Ø8 mm, Sealed, Argon-Gas-Filled Collimator
-
DLA499566, Lambda beam pigtailed 785-6.5 PM, 785 nm, 6.5 mW fiber out, polarization-maintaining fiber, FC/PC
-
DLA499575, Lambda beam pigtailed 1550-1.5 PM, 1550 nm, 1.5 mW fiber out, polarization-maintaining fiber, FC/PC
-
DLA499577, Lambda beam pigtailed 405-300 MM, 405 nm, 300 mW fiber out, multi-mode fiber, FC/PC
