DLA499533, Lambda beam pigtailed 960-100 SM, 960 nm, 100 mW fiber out, single-mode fiber, FC/PC
-
DLA499186, Lambda beam pigtailed 505-15 SM, 505 nm, 15 mW fiber out, single-mode fiber, FC/PC
-
DLA499529, Lambda beam pigtailed 852-100 SM, 852 nm, 100 mW fiber out, single-mode fiber, FC/PC
-
DLA499532, Lambda beam pigtailed 520-40 SM, 520 nm, 40 mW fiber out, single-mode fiber, FC/PC
-
DLA499577, Lambda beam pigtailed 405-300 MM, 405 nm, 300 mW fiber out, multi-mode fiber, FC/PC
-
DLA499580, Lambda beam pigtailed 635-7.5 MM, 635 nm, 7.5 mW fiber out, multi-mode fiber, SMA905
-
DLA499582, Lambda beam pigtailed 658-22.5 MM, 658 nm, 22.5 mW fiber out, multi-mode fiber, SMA905
-
DLA499775, Lambda beam pigtailed 785-50 VHG SM, 785 nm, 50 mW fiber out, single-mode fiber, FC/APC Wavelength-Stabilized Output (VHG) Narrow 10 MHz typical Linewidth (CW, FWHM) Integrated Optical Isol
-
DLA499780, Lambda beam pigtailed 808-100 SM, 806 nm, 100 mW fiber out, single-mode fiber, FC/PC
Lambda Beam Pigtailed
Lambda Beam Pigtailed is a compact, fiber-coupled laser module featuring a permanently attached optical fiber for maximum stability, reliability, and ease of integration. Designed to meet the demanding requirements of industrial systems and scientific instrumentation, the module delivers high optical performance in an exceptionally compact form factor.
* Output powers up to 300mW
* FC/PC or FC/APC connectors
* Single-mode/Polarization-maintaining available
* Internal 8°-angle-cleaved fiber to reduce back reflexion
Wavelength: 960nm
Power: 100mW
Back reflexion suppression: Internal 8°-Angle-Cleaved fiber
Connector: FC/PC or FC/APC
Beam mode: TEM00 (single mode)
Beam alignment: < 5 mrad and < 0.1 mm (compared to base mount)
Noise: < 2 % RMS
Power stability: < 1 % (10h)
Temp. accuracy: < 10 mK
Warm-up time: Ready for use after 5s, calibrated operation after 5 min
Drive mode: Active current control
Modulation: Adjustable constant power; analog or digital external modulation up to 1.5 MHz
Control modes: Power, temperature and modulation mode via USB
Recommended products
Goggle suggestions use the ANSI Z136.1 method for continuous-wave lasers (7 mm pupil; 0.25 s for visible, 10 s for near-infrared wavelengths) and list only goggles rated at or above the required optical density at this wavelength. Please confirm the choice with your laser safety officer.
Frequently Bought Products
Product Queries (0)
Ask Britton a technical question Or Log In to post it here
Other Questions
No none asked to seller yet
-
DLA499186, Lambda beam pigtailed 505-15 SM, 505 nm, 15 mW fiber out, single-mode fiber, FC/PC
-
DLA499529, Lambda beam pigtailed 852-100 SM, 852 nm, 100 mW fiber out, single-mode fiber, FC/PC
-
DLA499532, Lambda beam pigtailed 520-40 SM, 520 nm, 40 mW fiber out, single-mode fiber, FC/PC
-
DLA499577, Lambda beam pigtailed 405-300 MM, 405 nm, 300 mW fiber out, multi-mode fiber, FC/PC
-
DLA499580, Lambda beam pigtailed 635-7.5 MM, 635 nm, 7.5 mW fiber out, multi-mode fiber, SMA905
-
DLA499582, Lambda beam pigtailed 658-22.5 MM, 658 nm, 22.5 mW fiber out, multi-mode fiber, SMA905
-
DLA499775, Lambda beam pigtailed 785-50 VHG SM, 785 nm, 50 mW fiber out, single-mode fiber, FC/APC Wavelength-Stabilized Output (VHG) Narrow 10 MHz typical Linewidth (CW, FWHM) Integrated Optical Isol
-
DLA499780, Lambda beam pigtailed 808-100 SM, 806 nm, 100 mW fiber out, single-mode fiber, FC/PC
